[Update May 6, 2022] NSE 6 Network Security Specialist NSE6_FWF-6.4 dumps from Lead4Pass with PDF and VCE

May 6, 2022

Lead4Pass has shared the latest NSE6_FWF-6.4 dumps exam questions and answers more than once, and today continues to share some free NSE6_FWF-6.4 exam questions and answers to help all candidates progress.

Lead4Pass has also helped candidates pass the NSE 6 Network Security Specialist NSE6_FWF-6.4 Fortinet NSE 6 – Secure Wireless LAN 6.4 certification exam more than once because they use
Full NSE6_FWF-6.4 dumps with PDF and VCE: https://www.leads4pass.com/nse6_fwf-6-4.html (30 Q&A).

Check out the NSE 6 Network Security Specialist NSE6_FWF-6.4 PDF exam questions and answers shared for free: https://drive.google.com/file/d/12CqXPXwqeWmFzUfOsO9A8zqueksKrSPT/

Read the NSE 6 Network Security Specialist NSE6_FWF-6.4 exam questions and answers shared online today:

Number of exam questionsExam nameFromRelease time
15Fortinet NSE 6 – Secure Wireless LAN 6.4Lead4PassMay 06, 2022
New Question 1:

Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)

A. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.

B. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.

C. DARRP measurements can be scheduled to occur at specific times.

D. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.

 

Correct Answer: AD

DARRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise, and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network. When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.

 


New Question 2:

Which factor is the best indicator of wireless client connection quality?

A. Downstream link rate, the connection rate for the AP to the client

B. The receive signal strength (RSS) of the client at the AP

C. Upstream link rate, the connection rate for the client to the AP

D. The channel utilization of the channel the client is using

 

Correct Answer: B

SSI, or “Received Signal Strength Indicator,” is a measurement of how well your device can hear a signal from an access point or router. It\’s a value that is useful for determining if you have enough signal to get a good wireless connection.

 


New Question 3:

When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)

A. When the AP detects any other wireless signal stronger than -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

B. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger than -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.

C. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.

D. When the AP detects any interference from a trusted neighboring AP stronger than -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

 

Correct Answer: AC

 


New Question 4:

Refer to the exhibits.

Exhibit A.

new NSE6_FWF-6.4  exam questions 6

Exhibit B.

new NSE6_FWF-6.4 exam questions 6-1

Exhibit C.

new NSE6_FWF-6.4 exam questions 6-2

A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoТ devices.

Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.

To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?

A. Increase the transmission power of the AP radios

B. Enable frequency handoff on the AP to band-steer clients

C. Reduce the number of wireless networks being broadcast by the AP

D. Install another AP in the reception area to improve available bandwidth

 

Correct Answer: A

 


New Question 5:

Which two statements about background rogue scanning are correct? (Choose two.)

A. A dedicated radio configured for background scanning can support the connection of wireless clients

B. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP

C. Background rogue scanning requires DARRP to be enabled on the AP instance

D. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band.

 

Correct Answer: AB

To enable rogue AP scanning

Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/723e20ad-509811e9-94bf-00505692583a/FortiWiFi_and_FortiAP-6.2.0-Configuration_Guide.pdf


New Question 6:

When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)

A. 81 Tunnel-Private-Group-ID

B. 65 Tunnel-Medium-Type

C. 83 Tunnel-Preference

D. 58 Egress-VLAN-Name

E. 64 Tunnel-Type

 

Correct Answer: ABE

The RADIUS user attributes used for the VLAN ID assignment are:

IETF 64 (Tunnel Type)-set this to VLAN.

IETF 65 (Tunnel Medium Type)-set this to 802

IETF 81 (Tunnel Private Group ID)-set this to VLAN ID.

Reference: https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/71683dynamicvlan-config.html


New Question 7:

Which two phases are part of the process to plan a wireless design project? (Choose two.)

A. Project information phase

B. Hardware selection phase

C. Site survey phase

D. Installation phase

 

Correct Answer: CD

 


New Question 8:

When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)

A. Control channels

B. Security channels

C. FortLink channels

D. Data channels

 

Correct Answer: AD

The control channel for managing traffic is always encrypted by DTLS. l The data channel for carrying client data packets.

 


New Question 9:

Part of the location service registration process is to link FortiAPs in FortiPresence.

Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)

A. AP Manager

B. FortiAP Cloud

C. FortiSwitch

D. FortiGate

 

Correct Answer: BD

FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)

 


New Question 10:

Which two configurations are compatible with Wireless Single Sign-On (WSSO)? (Choose two.)

A. A VAP configured for captive portal authentication

B. A VAP configured for WPA2 or 3 Enterprise

C. A VAP configured to authenticate locally on FortiGate

D. A VAP configured to authenticate using a radius server

 

Correct Answer: BD

In the SSID choose WPA2-Enterprise authentication.

WSSO is RADIUS-based authentication that passes the user\’s user group memberships to the FortiGate.

 


New Question 11:

Where in the controller interface can you find a wireless client\’s upstream and downstream link rates?

A. On the AP CLI, using the cw_diag kata command

B. On the controller CLI, using the diag wireless-controller wlac -d sta command

C. On the AP CLI, using the cw_diag -d sta command

D. On the controller CLI, using the WiFi Client monitor

 

Correct Answer: B

 


New Question 12:

Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?

A. Security Fabric

B. SSH

C. HTTPS

D. FortiTelemetry

 

Correct Answer: A

Reference: https://docs.fortinet.com/document/fortigate/6.2.9/cookbook/788897/configuring-the-rootfortigate-and-downstream-fortigates


New Question 13:

Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)

A. Gathering details about on-site visitors

B. Predicting the number of guest users visiting on-site

C. Comparing current data with historical records

D. Reporting potential threats by guests on site

 

Correct Answer: AB

 


New Question 14:

What type of design model does FortiPlanner use in a wireless design project?

A. Architectural model

B. Predictive model

C. Analytical model

D. Integration model

 

Correct Answer: A

FortiPlanner will look familiar to anyone who has used architectural or home design software. Reference: http://en.hackdig.com/?7883.htm


New Question 15:

As a standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?

A. Create wireless LAN-specific policies

B. Preauthorize APs

C. Create a custom AP profile

D. Set the wireless controller country setting

 

Correct Answer: C

 

Lead4Pass updates NSE 6 Network Security Specialist NSE6_FWF-6.4 exam questions and answers throughout the year and frequently shares a selection of free exam questions and answers, as shown above, candidates can improve themselves through online learning.

Also able to download the latest NSE6_FWF-6.4 dumps: https://www.leads4pass.com/nse6_fwf-6-4.html (Dumps PDF+VCE) to help them successfully pass the NSE6_FWF-6.4 Fortinet NSE 6 – Secure Wireless LAN 6.4 certification exam on their first attempt.