The latest NSE7_EFW-6.4 dumps exam questions and answers shared online

The latest NSE7_EFW-6.4 dumps contain 184 exam questions and answers, use the newly updated NSE7_EFW-6.4 dumps https://www.leads4pass.com/nse7_efw-6-4.html to help you easily pass Fortinet NSE 7 – Enterprise Firewall 6.4 Exam.

And, I also share some NSE7_EFW-6.4 exam questions and answers online to help you experience the actual exam first. NSE7_EFW-6.4 dumps consist of PDF files and a VCE exam engine, you can choose any practice mode to practice and complete NSE7_EFW-6.4 exam questions to ensure your 100% exam success.

Next, check out the free NSE7_EFW-6.4 dumps exam questions and answers

QUESTION 1:

Which real-time debug should an administrator enable to troubleshoot RADIUS authentication problems?

A. Diagnose debug application radius -1.

B. Diagnose debug application fnbamd -1.

C. Diagnose authd console -log enable.

D. Diagnose radius console -log enable.

Correct Answer: B

QUESTION 2:

Which of the following statements are true regarding the SIP session helper and the SIP application layer gateway (ALG)? (Choose three.)

A. SIP session helper runs in the kernel; SIP ALG runs as a user space process.

B. SIP ALG supports SIP HA failover; SIP helper does not.

C. SIP ALG supports SIP over IPv6; SIP helper does not.

D. SIP ALG can create expected sessions for media traffic; SIP helper does not.

E. SIP helper supports SIP over TCP and UDP; SIP ALG supports only SIP over UDP.

Correct Answer: BCD

QUESTION 3:

What does the dirty flag mean in a FortiGate session?

A. Traffic has been blocked by the antivirus inspection.

B. The next packet must be re-evaluated against the firewall policies.

C. The session must be removed from the former primary unit after an HA failover.

D. Traffic has been identified as from an application that is not allowed.

Correct Answer: B

QUESTION 4:

Two independent FortiGate HA clusters are connected to the same broadcast domain. The administrator has reported that both clusters are using the same HA virtual MAC address. This creates a duplicated MAC address problem in the network.

What HA setting must be changed in one of the HA clusters to fix the problem?

A. Group ID.

B. Group name.

C. Session pickup.

D. Gratuitous ARPs.

Correct Answer: A

QUESTION 5:

Which the following events can trigger the election of a new primary unit in a HA cluster? (Choose two.)

A. Primary unit stops sending HA heartbeat keepalives.

B. The FortiGuard license for the primary unit is updated.

C. One of the monitored interfaces in the primary unit is disconnected.

D. A secondary unit is removed from the HA cluster.

Correct Answer: AC

QUESTION 6:

View these partial outputs from two routings debug commands:

Which outbound interface will FortiGate use to route web traffic from internal users to the Internet?

A. Both port1 and port2

B. port3

C. port1

D. port2

Correct Answer: C

QUESTION 7:

View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.

Why didn\’t the tunnel come up?

A. The pre-shared keys do not match.

B. The remote gateway\’s phase 2 configuration does not match the local gateway\’s phase 2 configuration.

C. The remote gateway\’s phase 1 configuration does not match the local gateway\’s phase 1 configuration.

D. The remote gateway is using aggressive mode and the local gateway is configured to use man mode.

Correct Answer: C

QUESTION 8:

An administrator is running the following sniffer in a FortiGate:
diagnose sniffer packet any “host 10.0.2.10” 2

What information is included in the output of the sniffer? (Choose two.)

A. Ethernet headers.

B. IP payload.

C. IP headers.

D. Port names.

Correct Answer: BC

QUESTION 9:

Refer to the exhibit, which contains partial output from an IKE real-time debug.

Based on the debug output, which phase 1 setting is enabled in the configuration of this VPN?

A. auto-discovery-shortcut

B. auto-discovery-forwarder

C. auto-discovery-sender

D. auto-discovery-receiver

Correct Answer: C

QUESTION 10:

Refer to the exhibit, which contains partial outputs from two routing debug commands.

Why is the port2 default route not in the second command\’s output?

A. It has a higher priority value than the default route using port1.

B. It is disabled in the FortiGate configuration.

C. It has a lower priority value than the default route using port1.

D. It has a higher distance than the default route using port1.

Correct Answer: D

QUESTION 11:

Examine the following traffic log; then answer the question below.

date-20xx-02-01 time=19:52:01 devname=master device_id=”xxxxxxx” log_id=0100020007type=event subtype=system pri critical vd=root service=kemel status=failure msg=”NAT port isexhausted.”

What does the log mean?

A. There is not enough available memory in the system to create a new entry in the NAT port table.

B. The limit for the maximum number of simultaneous sessions sharing the same NAT port has been reached.

C. FortiGate does not have any available NAT port for a new connection.

D. The limit for the maximum number of entries in the NAT port table has been reached.

Correct Answer: B

QUESTION 12:

Which two statements about an auxiliary session are true? (Choose two.)

A. With the auxiliary session setting enabled, ECMP traffic is accelerated to the NP6 processor.

B. With the auxiliary session setting enabled, two sessions will be created in case of routing change.

C. With the auxiliary session setting disabled, for each traffic path, FortiGate will use the same auxiliary session.

D. With the auxiliary session disabled, only auxiliary sessions will be offloaded.

Correct Answer: CD

QUESTION 13:

View the exhibit, which contains the output of a debug command, and then answer the question below.

Which of the following statements about the exhibit are true? (Choose two.)

A. In the network on port4, two OSPF routers are down.

B. Port4 is connected to the OSPF backbone area.

C. The local FortiGate\’s OSPF router ID is 0.0.0.4

D. The local FortiGate has been elected as the OSPF backup designated router.

Correct Answer: BC

[PDF Download] Download the above free NSE7_EFW-6.4 dumps exam questions and answers: https://drive.google.com/file/d/12YnWC4VQRy4aO4VS20zJJYKGSAKRHDVm/

Follow fortinetexamdumps.com to update Fortinet exam practice questions and answers online throughout the year. The above exam questions can only help you warm up, download NSE7_EFW-6.4 dumps https://www.leads4pass.com/nse7_efw-6-4.html, and Practice the complete NSE7_EFW-6.4 exam questions to help you pass the Fortinet NSE 7 – Enterprise Firewall 6.4 Exam with ease.

On the Fortinetexamdumps platform, you can participate in the free Fortinet(nse4,nse5,nse6,nse7,nse8) dumps program. Then test practice online. And you can download the PDF file. Any other questions, you can email [email protected]

You May Have Missed